Choose the dialing mode, If you aren't sure of your dialing system, Step 2: setting up the base unit (continued) – Sony SPP-A700 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

step 2: Setting up the base unit (continued)

Notes

• Ust’ only the supplied At'-T4u AC power ad.iptor.

Do not use any other AC power adaptor.

• Conneet the AC power adaptor to a eontinuous power

supply.

• Place the base unit close to the AC outlet so that you

can unplug the AC power adaptor easily.

Polarity of the plug

Tips

It your telephone outlet isn't modular, contact your
telephone .service company for assistance.

To remoye the wall bracket, press the upper tab.

Modular

Choose the dialing mode

For the telephone to work properly, select an appropriate dialing mode
(tone or pulse).

DIAL MODE switch

Depending on your dialing system, set the DIAL MODE switch as
follows:

If your dialing system is

Set the switch to

Tone

Pulse

If you aren't sure of your dialing system

Make a trial call with the DIAL MODE switch set to T.
If the call connects, leave the switch as is; otherwise, set to P.

™

Getting started