Sony SPP-A700 - Manual (Page 19)

4 Press (TPGlvr).
"ENTER NUMBER" appears.
5
Enter the phone number.
You can enter up to 16 digits, including a tone
and a pause, each of which is counted as one
digit.
SONY
1234'
O Press (PGM).
You hear a long confirmation beep, and the name and the number are
stored.
Notes
• If vou try to save a 21st phone nunrber, you will hear five short error beeps
and "MEMORY FULL" will be displaved. You cannot store the phone
number. To store another phone nunrber, erase one of the stored phoire
numbers (see page 20).
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
Tips
• If you have entered a wrong name or number in step 3 or 3, press ▼ to erase
it. Then enter the correct name or number.
You may press ( E nter ~) instead of ( in steps 4 and 6.
To store a number to be dialed via Private Branch Exchange
(PBX)
Before entering a phone number in step 5 abpve, do as follows:
1 Enter the outside line access digit (e,g., 9).
2
Press CREDlAiyPAUSEl.
continued
Telephone Features 19