Sony SPP-A700 - Manual (Page 13)

step 4
Entering your area code
When vou use this phone for tire first time, or mo\'e to ,in nren tliat lias
a different area code, you must enter your area code.
This is necessary because the phone must distinguish local or long
distance calls to properly dial calls from the Caller ID list.
1
Press (PGM).
Press ▲ to make “AREA" flash.
d I rec T or WS^
Gi
o
3
s'
(Cl
(/I
!-►
fli
«
a
4
5
Press (ENTER).
“ENTER AREA CODE" appears
on the display.
Enter three digits of your area
code using the dialing keys.
Press C pgm ).
You hear a long confirmation
beep.
Notes
• If an area code is already entered, it appears on the display in step 3. To enter
a different area code, see "To change the area code" below.
• Do not allow more than 20 seconds to elapse between each step of the procedure.
Tips
• You may press (ENTER) instead of (PGM) in step 5.
• To check the current area code, perform steps 1 to 3 above. The area code
appears on the display for 20 seconds.
To change the area code
1 Perform steps 1 to 3 above.
The current area code appears on the display.
2
Enter a new area code using the dialing keys.
3 Press
( PGM).
You hear a long confirmation beep.
Getting Started, l3‘