To connect optional av components, To deactivate the demonstration – Sony MHC-RXD9 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 1: Hooking up the system
(continued)
Connect the FM/AM antennas.
Set up the AM loop antenna, then
connect it.
Jack type ®
Extend the FM lead
AM loop antenna antenna horiz^tally.
Jack type (§)
AM loop antenna
Extend the FM lead
antenna horizontally.
'A
l
For models with a voltage selector,
set VOLTAGE SELECTOR to
position of your local power line
voltage.
El
Connect the power cord to a wall
outlet.
The demonstration appears in the
display. When you press I / Ci), the
system turns on and the demonstration
automatically ends.
If the supplied adapter on the plug does
not fit your wall outlet, detach it from
the plug (only for models equipped with
an adapter).
To connect optional AV
components
See page 41.
To deactivate the demonstration
When you set the time (Step 2: Setting the
time), the demonstration is deactivated.
To activate/deactivate the demonstration
again, press DISPLAY (MHC-RXD9/RXD80/
RXD7/R770) or DEMO (STANDBY)
(MHC-GRX9900 / GRX70 / GRX70J / GRX50)
while the system is off.