Sony MHC-RXD9 - Manual (Page 18)

Recording from a
tape
—
High-speed Dubbing
You can use TYPE I (normal) or TYPE II
(Cr02) tapes. The recording level is
automatically adjusted.
|/(!)
(Power) DOLBY NR
3
Press DIRECTION repeatedly to •
select to record on one side.
Select (or RELAY) to record on
both sides.
4
Press REC PAUSE / START.
Dubbing starts.
To stop dubbing
Press ■.
Tips
• when you dub on both sides, start recording from
the front side. If you record from the reverse side,
recording stops at the end of the reverse side.
• If you set DIRECTION to when the tapes you
use have different lengths, the tape in each deck
reverses independently. If you select RELAY, the
tapes in both decks reverse together.
• You don't have to set DOLBY NR, since the tape in
deck B is automatically recorded in the same state
as the tape in deck A.
1
Press = and insert a recorded tape
in deck A and a recordable tape in
deck B.
With the side
you want to
play/record
facing forward
2
Press HI-DUB.
Deck B stands by for recording.
1R