Sony MHC-RXD9 - Manual (Page 13)

Recording a CD
—
CD Synchro Recording
The CD SYNC button lets you record from a
CD to a tape easily. You can use TYPE 1
(normal) or TYPE II (Cr02) tapes. The
recording level is adjusted automatically.
DISC SKIP/
EX-CHANGE
1
Press = and insert a recordable tape
into deck B.
With the side
you want to
record facing
forward
Press = and place a CD.
Then press again to close the disc tray.
If the indicator for the tray you want to
record is not lit green, press DISC SKIP/
EX-CHANGE repeatedly so that it lights
green.
With the label
side up. When
you play a single
CD, place it on
the inner circle
of the tray.
Press CD SYNC.
Deck B stands by for recording and the
CD player stands by for playback. The
indicator on TAPE B ► (for front side)
lights up.
4
i Press DIRECTION repeatedly to
select to record on one side.
Select (or RELAY) to record on
both sides.
5
Press REC PAUSE/START.
Recording starts.
To stop recording
Press ■.
Tips
• If you want to record from the reverse side, press
TAPE B to light its indicator after pressing CD
SYNC.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that "DOLBY NR" appears after pressing CD
SYNC.
Note
You cannot listen to other sources while recording.
a a>
V)
OTt
n
O
•a
ft
fi»
S'
3
vt
13