Sony MHC-RXD9 - Manual (Page 12)

Playing a CD (continued)
To Do this
Stop play Press ■.
Pause Press CD ►!! (II on the
remote). Press again to resume
play.
Select a track During play or pause, turn the
jog dial clockwise (to go
forward) or counterclockwise
(to go back) and release it
when you reach the desired
track. (Or press (to go
forward) or (to go back)
on the remote.)
Find a point in Press and hold down ►► or
a track ◄◄ during play and
release it at the desired point.
Select a CD Press a DISC 1~3 button or
in stop mode DISC SKIP/EX-CHANGE.
Play only the
CD you have
selected Press PLAY MODE
repeatedly until "1 DISC" i
appears.
Play all CDs Press PLAY MODE repeatedly
until "ALL DISCS" appears.
Remove the CD Press =.
Exchange other
CDs while Press DISC SKIP/
EX-CHANGE.
playing
Adjust the
volume Turn VOLUME (or press VOL
+/- on the remote).
• Pressing CD ►11 when the power is off
automatically turns the power on and starts CD
playback if there is a CD in the tray (One Touch
Play). When the system is in the Power Saving
Mode, the One Touch Play function does not
work,
• You can switch from another source to the CD
player and start playing a CD just by pressing
CD ►!! or the DISC 1~3 buttons (Automatic
Source Selection).
• If there is no CD in the player, "CD NO DISC"
appears in the display.
• When a disc tray holding a CD is selected (or
playing), the DISC 1~3 button for that tray lights
green. When a disc tray holding a CD is not
selected, the DISC 1~3 button for that tray lights
orange. When all disc trays are empty, the DISC.
1~3 buttons all light green.
Tips
4 T