To remove the battery pack, Notes on charging the battery pack, Charging and installing the battery pack – Sony CCD-TR714 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Charging and Installing the Battery Pack

To Remove the Battery Pack

Slide the battery pack in the direction of the arrow.

Notes on charging the battery pack

• The POWER lanap will remain lit for a while even if the battery pack is removed and the power

cord is unplugged after charging the battery pack. This is normal.

• If the POWER lamp does not light, set the selector to VTR (DC OUT) and disconnect the power

cord. After about one minute, reconnect the AC power cord and set the selector to CHARGE again.

• You cannot operate the camcorder using the AC power adaptor while charging the battery pack.