Editing onto another tape, To edit more scenes, To stop editing – Sony CCD-TR714 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing onto Another Tape
You can create your own video program by editing with any other 0 8 mm, Hi0 Hi8, iVHSl
VHS,
SVHS
S-VHS, iV-HSHVHSC,
SiRSH
S-VHSC,
i0 Betamax or l^■lвela ED Betamax
VCR
that has video/
audio inputs.
After connecting the camcorder to the VCR,
(1) Slide the POWER switch to PLAYER.
(
2
)
Insert a blank tape (or a tape vou want to record over) into the recording VCR. Then insert your
recorded tape into the camcorder.
(3) Play back the recorded tape on the camcorder until you locate the point where you want to start
editing. Then press II to set the camcorder to playback pause mode.
(4) Set the recording VCR to recording pause mode.
(5) Press II on the camcorder and then on the VCR to start editing.
To Edit More Scenes
Repeat steps .8 to 5.
To Stop Editing
Press ■ STOP on the camcorder and VCR.
30