Selecting stereo or bilingual programs, Only) – Sony KV-20VM40 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting stereo or bilingual
programs
(
kv
-2
ovs
4
o
only)
The Multichannel TV Sound (MTS) feature allows you to switch between
stereo, mono, and Second Audio Program (SAP).
1
Press MENU to display the main menu.
2
Move the cursor (►) to "AUDIO" with + ■(> or - O and press SELECT.
The AUDIO menu appears.
AUDIO
►BASS
TREBLE
BALANCE
MTS:
STEREO
SURROUND :
ON
PMENU
MoveQlS SelectSSD Exitogwa
3
Move the cursor (►) to "MTS" with + O or - O and press SELECT.
The selected position turns red.
AUDIO
BASS
TREBLE
lUtlUNIIIIIIti-x..... ..................................
BALANCE
MTS;
STEREO
SURROUND :
ON
7MENU
Move(£i!|) Select^^D Exitggwt
4
Using + O or - O, select "STEREO," "SAP," or "MONO" and press
SELECT.
AUDIO
BASS
TREBLE
Maiguwiii<'*»<-«>"
BALANCE
►MTS:
SAP
SURROUND :
ON
7MENU
Moveil)@ SelectSBD Exiles
Note
If you set MTS to "SAP' and a SAP
signal is not being broadcast, no
sound will come from the speakers.
(However, the program's primary
audio channel will be recorded.) See
page 22 for a table describing the
relation between the speakers and
the source signal.
Choose
To
STEREO
Select for stereo reception when,viewing a program broadcast in stereo.
SAP
Select to listen to a bilingual broadcast.
MONO
Select for mono reception (use to reduce noise during stereo broadcasts).
To restore the factory settings
Press RESET after selecting and displaying the AUDIO menu.
All of the settings are restored to the factory settings.
Basic Operations
I
21