Watching the tv, Switching the video/tv on and off, Switching on – Sony KV-20VM40 User Manual
Page 18: Switching off, Selecting tv programs, Adjusting the volume, Muting the sound, Switching quickly between two channels
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Operations
Watching the TV
Note
You can not jump to channels you
scanned through using the CH +/-
buttons.
18
1
Basic Operations
This section explains the basic functions to use while watching the TV.
Jvlost of the operations can be done using the remote control.
Switching the Video/TV on and off
Switching on
Press POWER.
The STANDBY lamp flashes until the picture appears.
Switching off
Press POWER.
The Video/TV enters standby mode and the STANDBY lamp on the front
of the Video/TV lights up in red if a tape is inserted in the Video/TV.
If a tape is not inserted in the Video/TV, the STANDBY lamp disappears.
Selecting TV programs
Turn the cable mode ON or OFF to select the type of channel you want to
watch. For more information on setting the cable mode, see "Setting cable
TV on or off" on page 9.
Press CH +/- or the 0-9 buttons on the remote control, or CHANNEL +/-
on the Video/TV.
To select a double-digit numbers using the
0-9 buttons
For example, if you want to select 21, first press 2, then press 1.
Adjusting the volume
Press VOL -(-/-.
Muting the sound
Press MUTING.
"MUTING" appears on the screen.
To resume normal sound, press MUTING again, or press VOL +.
Switching quickly between two
channels
Press JUMP. The chaimel switches to the previously selected channel.
Pressing JUMP again switches the channel back to the originally selected
channel.