Sony SPP-A450 - Manual (Page 26)

Preparing the answering machine
Setting the date and time (SPP-A450 only)
Incoming messages are
automatically stamped
with the day and time.
Setting the correct day
and time enables you to
know when a message
was recorded.
QD — (S)-
(£>•
■REMOTE
I
a
If you enter a wrong day or
lithe, try again from step 1.
I
a
If 2 minutes elapse while
performing steps 2 to 3, the
operation is canceled. Try again
from step 1.
I
a
When the power is connected,
Sunday, 12:00 AM is set and the
built-in clock start operation.
t Press REMOTE.
The REMOTE lamp lights.
2
Press the
3
Set the current day of the week and the
current time by pressing the dialing keys in
the following order.
1 Press the key CD to
days of the week as follows:
CD Sunday CD Monday CD Tuesday
CD Wednesday CD Thursday CD Friday
CD Saturday
2 Enter the hour (CDCD - CDCD).
3 Enter the minute (CDCD - CDCD).
4 Press the CD key for AM, or CD key for PM.
You will hear a long confirmation beep. You will
then hear the current day of the week and the time
from the base unit speaker and the handset speaker.
For single digit hour or minutes, be sure to press CD
first.
Example
To enter Thursday 6:45 PM, press the keys as follows:
CDCDCDCDCDCi)
4
Press REMOTE.
The REMOTE lamp goes off.
61 Using as a telephone answering machine