Hooking up the system – Sony CDP-C435 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Hooking Up the System
Notes on Connection
• Turn off the power to each unit before making connections.
Connect the AC power cord last.
• Be sure to insert the plugs firmly into the jacks. Loose
connections may cause hum or noise.
• Leave a little slack in the connecting cord to ailow for
inadvertent shock or vibration.
• Cord plugs and jacks are color coded:
Red plugs and jacks are for the right channel (R) and white
ones for the left channel (L).
When using the UNE OUT
There are two ways of connecting with LINE OUT as follows:
FIXED: The output level is fixed.
VARIABLE: The output level can be adjusted with the LINE OUT/
PHONE LEVEL control (or with the LINE OUT LEVEL +/- buttons on
the remote commander.)
Notes on LINE OUT
• Connect your system to the VARIABLE output when using Level Files.
• If the LINE OUT/PHONE LEVEL control (or the LINE OUT LEVEL +/-
buttons on the remote commander) is adjusted while recording, the
recording level will change even when it is preset on the tape deck.
Connecting an Amplifier
VARIABLE LINE OUT
CDP-C535
CDP-C435
to an AC outlet