Sony CDP-C435 - Manual (Page 23)

4
Press EDIT/riME FADE once after
specifying the recording time.
EDIT/nMEFAOE
h
use
I
I г г . г 8 m
The selections for side A are determined
automatically. "EDIT and “A" light up. “B” flashes.
Press EDIT/niME FADE once more, to make a
program for the other side of your tape.
EOrmiMEFAOE
'b
c9
CMC
I
I
1 * 5 fs-u, ±
^ ssc ^ ±
15
n □ £ £
□ □ £ £ 10
0
E 13 14
■
If "LINK” flashes, see "Adding Selection(s) •
LINK edit”.
Start recording on the cassette deck,
then press K
<5
The selections for side A wiil be played and then
the player will pause. "B” lights up in the tape side
indicator. Set the tape to the beginning of side B,
then press
P or II.
Adding Selection(s) - LINK edit
After all selections on the disc have been programmed, if
there is (a) selection(s) shorter than the remaining time,
"LINK” and the selection numbers wiil flash.
c9 й? й?
.vxx
one
I
I 1 8 . 8 8 M
To add a selection, press the numeric button for the selection
number or press EDIT/TIME FADE again. When pressing
EDIT/TIME FADE, a program wiil be made automatically to
fit the playing time as close as possible to the remaining
time. If enough time remains to fit more seiections, "LINK”
and the selection numbers keep flashing. When "LINK”
flashes, if you select another disc using DISC SKIP, the new
selection numberfs) on the new disc that fit in the remaining
time will flash. "EDIT disappears when the rest of the
playing time is less than 1 minute. Whether "LINK” is flashing
or not, you can use DISC SKIP to change the disc and
choose seiection(s) to fit the remaining time. If you do not
add any selection(s), press ■. "EDIT disappears.
To stop play
Press!.
You can play the same program repeatedly as long as you
do not cancel time edit or erase the program.
To cancel time edit
Press CLEAR.
"EDIT disappears.
To erase the program
Hold down CLEAR until "ALL CLr” appears in the display.
To check your program
See page 18.
If your disc has more than 20 selections
Selections over number 20 cannot be programmed with the time edit
function.
You cannot edit selections in the following cases:
• If you have programmed up to 32 steps (i.e. selections plus pauses).
• If you have programmed selections whose playing time exceeds 100
minutes.
• If you have programmed a selection number greater than 20.
To specify a different time for each side
Follow steps 1 to 4 and press II. Then repeat steps 2 and 4. Do not follow
step 5.
Notes on time edit
• The duration can be set to 99 minutes 59 seconds.
• Playback can be performed when “EDIT’ appears.
23