Sony CDP-C435 - Manual (Page 30)

Maintenance Specifications
Cleaning Your Player
Clean the cabinet, panel and controls with a soft cloth lightly
moistened with a mild detergent solution. Do not use any
type of abrasive pad, scouring powder or solvent such as
alcohol or benzine.
Cleaning Discs
When a disc becomes dirty, clean it with a cieaning doth.
Wipe the disc from the center out.
Do not use soivents such as benzine, thinner, commercialiy
available cleaners or anti-static spray intended for analog
discs.
Compact Disc Piayer
System
Laser
Wavelength
Frequency response
Signal to noise ratio
Dynamic range
Harmonic distortion
Channel separation
Outputs
LINE OUT
(FIXED)
(phono jacks)
LINE OUT
(VARIABLE)
(phono jacks)
PHONES
(stereo phone jack)
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Remote Commander
Remote control system
Power requirements
Dimensions
Mass
Compact disc digital audio system
Semiconductor laser
780-790 nm
2 Hz-20 kHz (±0.5 dB)
More than 107 dB
More than 98 dB
Less th£tn 0.0035%
More than lOOdB
Output level 2 V (at 50 kilohms, non
DSP mode.)
Load impedance over 10 kilohms
Output level max. 2V (at 50 kilohms.
non DSP mode.)
Load impedance over 50 kilohms
Output level max. 10 mW
Load impedance 32 ohms
Model for the USA and Canada
120 VAC, 60 Hz
Model for Australia
240V AC, 50/60 Hz
14 W
430 X 125 X 385 mm (w/h/d)
(17x 5x 1574inches)
(CDP-C535/C435)
Including projecting parts and
controls
5.7 kg, net
(12lbs10oz)
(CDP-C535/C435)
RM-D535 (CDP-C535)
RM-D435 (CDP-C435)
Infrared control
3 V DC with two size AA batteries
(lEC designation R6)
6 2 x 2 0 x 175 mm (w/h/d)
( 2 1 / 2 x 1 3 / 1 6 x 7 inches)
130 g (4.6 oz) including batteries
Design and specifications are subject to change without
notice.
О0