Troubleshooting, Power, Tv output – Canon PowerShot A495 User Manual
Page 113: Shooting
113
Troubleshooting
If you think there is a problem with the camera, first check the following. If
the items below do not solve your problem, contact a Canon Customer
Support Help Desk as listed on the included customer support list.
Power
You pressed the ON/OFF button, but nothing happened.
•
Confirm that the batteries are properly inserted
.
•
Confirm that the batteries are not depleted
.
•
Confirm that the memory card/battery cover is securely closed
.
•
If the battery terminals are dirty, battery performance will decrease. Clean the
terminals with a cotton swab and re-insert the batteries several times.
Batteries are consumed quickly.
•
Battery performance decreases at low temperatures. Warm the batteries, for
example, by placing them in your pocket, taking care that the terminals do not
come into contact with any metal objects.
Lens will not retract.
•
Do not open the memory card/battery cover while the power is on. After closing
the memory card/battery cover, turn the power on then back off
TV output
Image is distorted or not showing on TV
.
Shooting
Cannot shoot.
•
, press the shutter button halfway
Screen does not display properly in dark places
Screen does not display properly while shooting.
Please note, the following will not be recorded in still images, but will be recorded
in movies.
•
When the camera is subjected to powerful light sources, the display may
darken.
•
When shooting under fluorescent lighting, the screen may flicker.
•
When shooting bright light sources, a bar of light (purplish red) may appear on
the screen.
The screen turns off and you cannot shoot when you press the
shutter button
appears when the shutter button was pressed halfway
.
•
Set the flash to
•
Increase the ISO speed
•
Attach the camera to a tripod.
Image is blurred.
•
Press the shutter button halfway to focus on the subject, then press fully to
shoot