Sony MHC-RXD2 - Manual (Page 9)

To Do this
Stop play Press ■.
Pause Press CD ►II (or II on the
remote). Press again to resume
play.
Go to die next
brack or go
back to the
start of the
current track During play or pause, press
►W (to go forward) or t+d (to
go back).
Find a point in
a track Press and hold down ►► or
during play and release it
at the desired point.
Select a CD
in stc^ mode Press DKC1 - 3 or
DISC SKIP/EX-CHANGE.
Play only the
CD you have
selected Press PLAY MODE repeatedly
until "1 DISC" appears.
PUyaUCDs Press PLAY MODE repeatedly
until "ALL DISCS" appears.
Remove the CD Press ± OPEN/CLOSE.
Exchange other
CDs while
playing Press DISC SKIP/
EX-CHANGE.
Adjust the
volume Turn VOLUME (or press
VOL -(■/- on the remote).
Tips
• Pressing CD ^11 when the ^tem is
automatically turns the system on and starts CD
playback if there is a CD in die tray (One Touch
Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing
CD ►II or DBC1-3 (Automatic Source
Selection).
• If there is no CD in the player, "'CD NO DISC"
appears in the display.
Recording a CD
— CD Synchro Recording
TTie CD SYNC button lets you record from a
CD to a tape easily. You can use a TYPE I
(normal) tape.
I/C!)
(power) TAPE B ► ■
4 3
i
1
Press ™ and insert a blank tap>e into
deck B.
With the side
you want to
record facing
forward
continued