Note, Step 2: setting the time – Sony MHC-RXD2 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Q Connect the f>ower cord to a wall
outlet.
Ihe demonstration appears in the
display.
Q Deactivate the demonstration mode
by pressing DISPLAY/DEMO when
the system is turned off.
The demonstration mode is also
deactivated when you set the time.
Inserting two size AAA (R03)
batteries into the remote
Tip
With normal use, batteries should Ust for about
six months. When the remote no longer operates
the system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
Step 2: Setting the
time
You must set ttie time before using the timer
fuiKtions.
You can set the time while the system is off.
The clock is on a 12-hour (AM/PM) system.
1 2,4
DISPLAY/DEMO
1
Press CLOCK/TIMER SET.
The hour indication flashes.
I
'■àGChRr
2
Press or ►>! repeatedly to set
the hour.
3
Press ENTER/NEXT.
The minute indication flashes.
t1
—------------------------------------
continued