Sony MHC-RXD2 - Manual (Page 13)

1
Press = and insert a recorded tape
in deck A or B.
2
Press TAPE A ►or TAPE
(DECK A ► or DECK B on the
remote).
To play both decks in succession, press
RELAY (relay play)».
The tape starts playing.
• To enjoy relay play, the tapes must be always on
the front side.
To Doth!«
Stop play Pressi.
Pause Press PAUSE (or II on the
remote). Press again to
resume play.
Fast-forward Press
Rewind Press ■4^.
Remove the cassette Pressai.
Adjust the volume Turn VOLUME (or press
VOL +/- on the remote).
Note
Ihe AMS function may not operate correctly under
the following circumstances:
- When the unrecorded space between songs is less
than 4 seconds long.
- If completely different information is recorded on
the left and right channels.
- When diere are continuous sections of extremely
low level or low frequency sound (like those of a
baritone sax).
- When №e system is placed near a television. (In
this case, move the system ferdier away from the
television or turn off the television.)
Tips
• Pressing TAPE A ► or TAPE B ► when the
system is off automatically turns the system on
and starts tape playback if there is a tape in the
deck (One Touch Play).
• You can switdi from another source to ttie tape
deck just by pressing TAPE A ► or TAPE B ►
(Automatic ^urce Selection).
Searching for the start of the current
or the next track (AMS*)
To go forward, press during play. "TAPE A (or
TAPE B) »> +1" appears.
To go back, press Me during play. "TAPE A (or
TAPE B) «< -1" appears.
• Automatic Music Sensor