Erasing the disc memo, 1 press (source) repeatedly to select cd, 2 press (mode) repeatedly to select the cd changer – Sony CDX-C860 User Manual
Page 23: 3 press (list) for two seconds, 4 press (dspl) for two seconds, 6 press cd (enter) for two seconds, 7 press (list) for two seconds, Locating a disc by name, Press (list) momentarily, 3 press ® (enter) to play back the disc
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The display item will change depending on the setting
as follows:
Type of
di;c
Priority dispiay
setting
Actual display
Disc M EMO
Disc memo
TEXT name
CD-TEXT information
B
Disc M EMO
Disc memo
TEXT name
m
Disc M EMO
CD-TEXT information
TEXT name
m
Disc M EMO
NO D.Name
TEXT name
B
B
B
CD-TEXT disc with disc m emo
Normal CD w ith disc memo
CD-TEXT disc without disc memo
Normal CD w ithout disc memo
If you connect an optional CD changer with the
CD-TEXT function, the CD-TEXT information will
appear in the display when you playback a CD-
TEXT disc.
Erasing the disc memo
1
Press
(
SOURCE
)
repeatedly to select CD.
2
Press
(
MODE
)
repeatedly to select the CD
changer.
3
Press
(
LIST
)
for two seconds.
4
Press
(DSPL)
for two seconds.
5
Rotate the dial to select the name you
want to erase.
6 Press CD (ENTER) for two seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7
Press
(
LIST
)
for two seconds.^
The unit returns to normal CD playback
mode.
Locating a disc by name
— List-up (CD changer with the custom file
function or MD changer)
You can use this function for discs that have
been assigned a custom name. For more
information on disc names, refer to "Labeling a
CD" (page 22).
1
Press
(LIST)
momentarily.
The name assigned to the current disc
appears in the display.
L S T
SCHUBERT
If you add disc memo labels to a CD-TEXT
disc, the display setting you make will
determine which information is displayed.
If the disc has only one set of information
(either CD-TEXT or disc memo labels), that
information will be displayed regardless of
the display setting you make.
2 Press (LIST) repeatedly until you find the
desired disc.
3 Press ® (ENTER) to play back the disc.
Notes
•
After a disc name has been displayed for five seconds, the
display goes back to normal playback mode. To turn off
the display, press
( OSPX).
•
The track names are not displayed during MD playback.
•
If there are no discs in the magazine, “hJO Disc"
appears in the display.
• If a disc has not been assigned a custom file, "'********"
appears in the display.
•
If the disc information has not been read by the unit, "?"
appears in the display. To load the disc, first press the
number button, then choose the disc that has not been
loaded.
•
The information appears only in upper case. There are
also some letters which cannot be displayed (during MD
playback).
urn
n
D
n
D-
Q)
D
LQ
a>
23