Adjusting the sound characteristics, Muting the sound, Changing the sound and dispiay settings – Sony CDX-C860 User Manual
Page 17: Changing the sound and display settings, Shift)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Adjusting the sound
characteristics
You can adjust the bass, treble, balance and
fader.
Each source can store the bass and treble levels
respectively.
1
Select the item you want to adjust by
pressing (
sound
) repeatedly.
VOL (volume) —► SUR (surround menu)
—► POS (listening position) —► SUB
(subwoofer volume) —► BAS (bass) —► TRE
(treble) —+ BAL (balance) —► FAD (fader)
2
Adjust the selected item by rotating the
dial.
Adjust within three seconds after selecting
the item. (After three seconds, the dial
functions work as the volume control.)
Muting the sound
Press
(MUTE)
on the rotary remote or
wireless remote.
"Mute on" flashes momentarily.
To restore the previous volume level, press
(MUTE) again.
Tip
The unit decreases the volume automatically when a
telephone call comes in (Telephone mute functioni.
Changing the sound and
dispiay settings
You can set:
• Clock (page 5).
• D.lnfo (Dual Information) to display the
clock and the play mode at the same time
(ON) or to dispiay the information
alternately (OFF).
• Amber/Green to change the illumination
color to amber or green.
• Dimmer to change the brightness of the
display.
— Select "Auto" to dim the display only
when you turn the lights on.
— Select "on" to dim the display.
• Contrast to adjust the contrast if the
indications in the display are not
recognizable because of the unit's installed
position.
• Beep to turn on or off the beeps.
• RM (Rotary Remote) to change the operative
direction of the controls of the rotary remote.
— Select "norm" to use the rotary remote in
the factory-set position.
— Select "rev" when you mount the rotary
remote on the right side of the steering
column.
• Loud (Loudness) to enjoy bass and treble
even at low volume. The bass and treble will
be reinforced.
• A.Scrl (Auto Scroll) (page 6,18).
• Disc MEMO/TEXT name (Disc memo/CD-
TEXT name) to set the priority display item
when you cormect an optional CD changer
with the CD-TEXT and disc memo function
(page 22).
1
Press
(SHIFT).
2 Press СЮ (SET UP) repeatedly until the
desired item appears.
Each time you press
(23
(SET UP), the item
changes as follows:
Clock —► D.lnfo* —► Amber/Green —► Dimmer
—> Contrast —► Beep —* RM —» Loud* —►
A.Scrl* -* Disc МЕМОЛГЕХТ name*
*
When you have not tune the station or there is no
CD/MD being played, these items will not appear.
Note
The displayed item will differ depending on the source.
3
Press (T) (—►) to select the desired
setting (for example: on or off).
For the "Contrast" setting, pressing (3)
(—► ) makes the contrast higher, and
pressing Cl) (■ <—) makes the contrast lower.
4
Press
(SHIFT).
After the mode setting is complete, the
display goes back to normal playback
mode.
ВЦ
fD
C
D
О
D
17