Erasing the stored surround effect, Delete, Selecting the listening position – Sony CDX-C860 User Manual
Page 13: Fill, Adjusting the listening position, Adjusting the fader (fad), Fill 2, P0sr, Mu' d, 0)(m
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Erasing the stored surround effect
Press (D (ENTER) for two seconds in
step 2 of "Registering a surround menu
onto each disc."
D S M
+Delete+
Selecting the listening
position
You can set the time for the sound to reach the
listeners from the speakers.
The unit can to simulate a natural sound field
so that you can feel as if you are is in the centre
of the sound field wherever you sit in the car.
Display
window
Center of sound
field
All
Normal setting
(®+@+®)
FfOnt
Front part
(®+ @)
Front-R
Right front (®)
Front-L
Left front
(©)
Rear
Rear part (®)
1
Press (
SOUND
) momentarily until "POS"
appears.
P O S
fill
2
Rotate the dial to select the desired
listening position.
The listening positions appear in the order
shown in the table.
After three seconds, the display goes back
to normal playback mode.
Adjusting the listening position
1
Press
(SOUND)
repeatedly until "POS"
appears.
2
Rotate the dial to select the desired
listening position.
3
Press
(SOUND)
for two seconds.
:P0Sr ,
II
-R
4
Rotate the dial to adjust the center of
the sound field to the left or right. Then
set the center of the sound field.
Center moves to the L (left).
Center moves to the R (right).
5
Press ® (—<•).
'/mu' D.
II
To go back to the listening position, press
0)(M.
6 Rotate the dial to adjust the center of
the sound field to the front or rear.
Center moves to the R (rear).
Center moves to the F (front).
7
Press
(SOUND)
for two seconds.
When the effect setting is complete, normal
mode display appears.
Adjusting the fader (FAD)
Normally, with the DSP mode on, the volume
of the output sound from the rear speakers is
lowered automatically to improve the
efficiency of the listening position setting. If
you want to raise the rear speaker volume,
adjust the fader.
1
Follow steps 1 through 3 of "Selecting a
surround menu" (page 12).
2
Press
(T
so
D
n d
))
repeatedly until "FAD"
appears.
3
Rotate the dial to adjust the fader.
Decreases front speaker volume
Increases front speaker volume
After three seconds, the display goes back
to normal playback mode.
13