Sony SPP-900 - Manual (Page 6)

Setting up the phone
Choose the best location
Where you place the base unit affects the reception quality of the handset.
Place the base unit;
- near a central location and on a level surface
- away from television sets and other electronic equipment, a personal
computer, or a microwave oven
- away from noise sources, such as a window by a street with hea\ y traffic
- away from another cordless telephone
- away from heat sources, such as radiators, airducts, and sunlight
- away from excessive moisture, extremely low temperatures, dust, mechanical
vibration, or shock
CAUTION
• Should you experience intermittent loss of audio during a conversation, try
moving closer to the base or move base unit away from other noise sources.
• The cordless telephone operates at a frequency that may cause interference to
nearby TVs and VCRs; the base unit should not be placed near or on the top of
a TV or VCR; and if interference is experienced, moving the cordless telephone
farther away from the TV or VCR will often reduce or eliminate the
interference.
Connect the base unit
If you want to hang the base unit on the wall, see “Mounting the base unit on a
wall".
outlet
1
2
3
Connect the telephone line cord to the LINE jack, and to a telephone
outlet.
Connect the AC power adaptor to the DC IN 9V jack, and to an AC
outlet.
Raise the antenna vertically.
Notes
• Use only the supplied AC-T127 AC power adaptor. Do not use
any other AC power adaptor.
• Connect the AC power adaptor to a continuous power supply.
• Place the base unit close to the AC outlet so that you can unplug
the AC power adaptor easily.
Tips
• If your telephone outlet is not modular, contact your telephone
service company for assistance.
• If you have two phone lines on a single jack with the first phone
line connected to a center pair of wires, and you need to connect
the second phone line (outer pair of wires), contact your
telephone company for rewiring.
Polarity of the plug
-
Modular
|D:
Center pair