I you also need to set the beep switch – Sony CCD-FX310 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Check that the following accessories are supplied with your camcorder.

f i l l

i r - l

Before you can use your camcorder, you need to:

1 Charge and install the battery pack.
2 Insert a tape.
3 Adjust the viewfinder lens to your eyes.

4 Install the lithium battery.
5 Set the date and time.

This chapter takes you through these procedures step by step.

I You also need to set the BEEP switch

• The BEEP switch is preset to ON: the camcorder will beep when you start and stop

recording and as a warning of unusual conditions (see page 50). These beeps will

not be recorded on the tape.

• Set the BEEP switch to OFF, to deactivate the beep.