Sony CCD-FX310 - Manual (Page 35)

Playing Back a Tape In Various Speeds
The supplied wireless Remote Commander is useful to control the camcorder from a
distance When using it, be sure to set the 19 REMOTE COMMANDER ON/OFF switch to
ON.
To make the same indications in the viewfinder on the TV (only on the Commander)
Press DATA SCREEN.
To turn the indications off, press it again.
This DATA SCREEN on TV will tell you which playback mode you are using.
To view the still picture (playback pause)
Press II during playback
II appears in the viewfinder.
To resume normal playback, press [> or II.
Note
When the still picture mode lasts for 5 minutes or more, the camcorder automatically
enters the stop mode.
To view the picture at 1/5 speed (slow playback) (only on the Commander)
Press !► during playback .
!► appears in the viewfinder.
Note
To resume normal playback, press I>.
When slow playback lasts for 1 minute or more, the playback at the normal speed starts automatically
To locate the desired scene (picture search)
Keep pressing « or^>- during playback or in the still picture mode. ® or @ appears m
the viewfinder.
To resume normal playback, release the button.
To locate the desired scene quickly (skip scan)
Press ◄◄ during rewinding or ►► during advancing the tape rapidly. ® or ® appears m
the viewfinder.
To resume normal playback, press t>.
About the playback picture
During the various playback modes, streaks appear on the screen.
Advanced Camera Operation
35