If your tv has only an antenna input – Sony CCD-FX310 User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

You can use this camcorder as a VCR by connecting it directly to your TV for playback.

After you connect this camcorder to your TV, use the Remote Commander for convenient
control of the camcorder.

If Your TV Has Only an Antenna Input

Use the supplied RFU adaptor to connect your camcorder to your TV. Before connecting,
make sure that the TV is turned off to prevent speaker damage.

If your TV has audio/

video inputs, see page 33.

Note

To connect your camcorder to a TV that is aiready connected to a regular TV (VHF)
antenna, you need to:

1 Unplug the antenna cable from your TV first.

Plug in the tail end of the RFU adaptor marked OUT to the antenna input of your TV.
Re-wire the antenna cable you unplugged to the RFU adaptor jack marked ANT. This

way, you can switch between TV broadcasting and your home video playback without
re-wiring.

Connect the RFU adaptor to the camcorder.
Connect the AC power adaptor to a wall outlet.

Set the channel selector on the RFU adaptor (and your TV channel) to 3 CH or 4 CH of
the VHF channel, whichever is not active (vacant) in your area.
Attach the connecting plate of the AC power adaptor to the camcorder.
Make sure the CHARGE/VTR selector on the AC power adaptor is set to VTR position.

CHARGE/VTR selector to OFF or turn off

Basic Camera Operation