Sony SLV-SE220B - Manual (Page 76)

Specifications
System
Channel coverage
SECAM (L):
VHF F2toF10
UHF F21 to F69
CATV BtoQ
HYPER S21 to S41
PAL (B/G):
VHFE2toE12
VHF Italian channel A to H
UHFE21 to E69
CATVS01to S05,S1toS20
HYPER S21 to S41
Aerial out
75-ohm asymmetrical aerial socket
Tape speed
SP: PAL 23.39 mm/s (recording/
playback)
NTSC 33.35 mm/s (playback only)
SECAM
23.39 mm/s (recording/
playback)
MESECAM
23.39 mm/s (playback only)
LP: PAL 11.70 mm/s (recording/
playback)*
NTSC 16.67 mm/s (playback only)
SECAM
11.70 mm/s (recording/
playback)
MESECAM
1.70 mm/s (playback only)
EP: NTSC 11.12 mm/s (playback only)*
Maximum recording/playback time
10 hrs. in LP mode (with E300 tape)
Rewind time
Approx. 1 min. (with E180 tape)
* not available on SLV-SE220B
Inputs and outputs
LIGNE-1 (EURO AV)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
LIGNE-2 (DEC/EXT)/LIGNE-3 (DEC/
EXT)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
t LIGNE-2 G O D* 1
VIDEO IN, phonojack (1)
Input signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO IN, phonojack (2)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
AUDIO (OUT/SORTIE) R/D L/G* 2
Phonojack (2)
Rated output level: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
* 1 SLV-SE820B only
* 2 not available on SLV-SE620B and
SE220B
General
Power requirements
220 - 240 V AC, 50 Hz
Power consumption
15 W (SLV-SE220B)
17 W (SLV-SE820B, SE720B and
SE620B)
3 W (VEILLE ECO is set to OUI,
minimum)
Operating temperature
5°C to 40°C
Storage temperature
-20°C to 60°C
76 Specifications