Sony SLV-SE220B User Manual
Page 73
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Symptom
Remedy
u
C3
0.
The picture rolls
vertically during picture
search.
• Adjust the vertical hold control on the TV or monitor.
The picture has no
sound.
• The tape is defective.
• If you made A^ connections, check the audio cable
connection.
The sound from a tape
recorded with the VCR is
not in stereo or the
STEREO indicator in the
display window is
flashing.
• Adjust the tracking.
• The video heads are dirty. Clean the video heads using the
Sony T-25CLD, E-25CLDR, or T-25CLW video head
cleaning cassette as explained above.
O)
c
0
u
0)
01
No TV programme
appears on the TV
screen.
• Make sure the TV is set to the video channel. If you are
using a monitor, set it to video input.
• Select the correct source with the CHOIX ENTREE button.
Select a programme position when recording TV
programmes; select a line input when recording from other
equipment.
TV reception is poor.
• Make sure the aerial cable is connected securely.
• Adjust the TV aerial.
• Make sure SYS. (L/L’ or B/G) in the RECHERCHE
MANUELLE menu is set to the same system in your local
area.
The tape starts playing as
soon as it is inserted.
• The safety tab has been removed. To record on this tape,
cover the tab hole (see page 40).
The tape is ejected when
you press
Z
ENR.
• The safety tab has been removed. To record on this tape,
cover the tab hole (see page 40).
Nothing happens when
you press 9 ENR.
• Make sure the tape is not at its end.
O)
c
o
u
0)
u
u
0)
E
H
The timer does not
operate.
• Check that the clock is set.
• Make sure a tape has been inserted.
• Check that the safety tab has not been removed.
• Make sure the tape is not at its end.
• Make sure a programme has been set for timer recording.
• Make sure your timer settings are past the current time.
• Check that the decoder is turned on.
• Check that the satellite tuner is turned on.
• The clock stops if the VCR is disconnected from the mains
for more than one hour. Reset the clock and timer.
• Turn the power off and unplug the mains lead.
>
a
a
o'
3
w
S'
o'
3
&>
o'
3
continued m
Troubleshooting 73