Sony SLV-SE220B - Manual (Page 70)

Basic editing
When recording on this VCR
Before you start editing
• Turn on your TV and set it to the video
channel.
• Press CHOIX ENTREE to display the
connected line in the display window.
• Press SP/LP to select the tape speed, SP or
LP.*
ENR •
^ O 1 I 6 o
O
X
^ Insert a source tape with its safety tab removed into the other (playback)
VCR. Search for the point to start playback and set it to playback pause.
2 Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press X (pause) to set it to
playback pause.
2 Press ENR 9 on this VCR to set it to recording pause.
^ To start editing, press the X (pause) buttons on both VCRs at the same
time.
To stop editing
Press the ■ (stop) buttons on both VCRs.
Tip
• To cut out unwanted scenes while editing, press X (pause) on this VCR when an
unwanted scene begins. When it ends, press X (pause) again to resume recording.
* not available on SLV-SE220B
70 Basic editing