Sony CCD-TR416 - Manual (Page 7)

Él ш
Charging the battery pack
Charge the batterx pack on a flat surface u ithout vibration. The battery pack is charged
a little in the tactcu'w
(1) Open the DC IN jack cover and connect the supplied .ЛС power adaptor to the
DC IN jack with the plug's A mark up.
( 2 ) Connect the power cord to the ЛС power adaptor.
(3) Connect the power cord to a wall outlet.
(4) Slide the POWHR switch to OFF. Remaiii'ing batter\' time is indicated b\ the
minutes on the display window. Charging begins.
When the reniaining batter\’ indicator becomes normal charge is completed, l-or
full charge, which allows vou to use the battery longer than usual, lea\’e the batter\-
pack attached for about 1 hour after normal charge is completed until FULL appears in
the display window.
Beka'e using the camcorder with the battei^' pack, unplug the
AC pcnver adaptor Irom
the DC IN jack of the camccu'der. You can also use the batter\- pack before it is
completeh’ charged.
r ^__________ ■Ч
POWER
■ camera ;
Щ
■ OFF
>
f nn
i и и min
A
/ Cumin
FULL
Notes
• min" appears on the display until the camcorder calculates remaining battery
time.
• Remaining battery time indication in the display window roughly indicates the
recording time. Use it as a guide. It may differ from the actual recording time.
• If there is a slight difference in shape between the plug of power cord and the terminal
of AC power adaptor, it is ignorable for their mutual connection and power supply.
•Be sure to plug the power cord deeply into the terminal of AC power adaptor so that it
is firmly locked. If there is a gap between the plug of power cord and the terminal of
AC power adaptor, it docs not affect the efficiency of the AC power adaptor.