Sony CCD-TR416 User Manual
Page 66
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Symptom
Cause and/or Corrective Actions
The playback picture is not clear.
• EDIT is set to ON in the menu system.
Set it to OFF. (p. 26)
The picture is ''mMs\'".
• The \'idoo heads may Lx' dirty.
-> Clean the heads using the Sony V8-25CLD/V8-25CLDR
cleaning cassette (not supplied), (p. .88)
An unknown picture is displa\’ed in
• If 10 minutes elapse after you set the POWER switch to
the viewfinder.
CAMERA without inserting a cassette, the camcorder
automatically starts the demonstration or DEMO MODE is
set ON in the menu system.
Insert the cassette and the demonstration stops.
You can deactivate the demonstration, (p. 25)
The ti\'e digit code appears.
• The self-diagnosis function is activated.
-> Check the code and solve the problem, (p. 66)
Picture is recorded in incorrect/
• The NIGHTSHOT switch is set to ON.
unnatural color.
Set it to OFF. (p. 30)
Picture appears to<.) bright, and the
• The NIGHTSHOT switch is set to ON in a bright place.
subject does not appear in the
Set it to OFF, or use the NightShot function in a dark
vicnvtinder.
place, (p. 30)
others
Symptom
Cause and/or Corrective Actions
The supplied Remote Commander
• COMMANDER is set to OFF in the menu system.
does not work. (CCD-TR516 only)
Set it to ON. (p. 24)
• Something is blocking the infrared rays.
Remcave the obstacle.
• The batteries arc not inserted with the correct polarity.
Insert the batteries with the correct polarity, (p. 72)
• The batteries are dead.
■> Insert new ones. (p. 72)
The beep sounds for 5 seconds.
• Moisture condensation has occurred.
Remove the cassette and leave the camcorder for at least
1 hour. (p. 57)
• Some troubles occured in your camcorder.
Remove the cassette and insert it again, then operate the
camcorder.
There is dust in the viewfinder.
(CCD-TR315only)
•'Detach the eyecup and clean the viewfinder, (p. 59)
65