Repjacing the bulb, Caution, Note – Sony CCD-TR416 User Manual
Page 48
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
m
m
RepJacing the bulb
Use the Sony XB-3D halogen lamp (not supplied). The supplied halogen lamp is not on
the market. Purchase the Sony XB-3D halogen lamp.
Remove the power source before replacing the bulb.
(1) VVhik' pushing the hole under the built-in light unit using .i wire, remo\ e the
unit.
(
2
)
Turn the bulb housing counterclockwise nnd detach from the built-in light
unit.
^
(3)
Replace the bulb using a dry cloth.
(4)
Attach the bulb housing turning it clockwise, then replace the built-in light
CAUTION
• When replacing the bulb, use only the Sony XB-3D halogen lamp (not supplied) to
reduce the risk of fire.
• To prevent possible burn hazard, disconnect the power source before replacing and
do not touch the bulb until tlie bulb becomes cool enough to handle (for about
30 minutes or more).
Note
To prevent the bulb from being smudged with finger prints, handle it with a dry cloth,
etc. If the bulb is smudged, wipe it completely.
47