Trouble check – Sony CCD-TR98 User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Trouble Check
Symptom
Cause and/or Corrective Actions
The date or time
• You pressed DAI E and TIME together for more than
indicator is flashing.
2 seconds.
The camcorder is not malfunctioning.
You mav start recording.Flashing will stop soon.
Fhe date or time indicator
disappears.
-> Reset the date and time, (p.3.8)
Recording stops in a few
• START/STOP MODE js set to A or 5 SEC.
seconds.
Set it to A . (p.26)
The built-in light turns off
• LIGHT is set to AUTO,
while in use.
Set it to ON. (p.22)
The built-in light turns on
• LIGHT is set to AUTO.
and off repeatedly.
•^Set it to ON. (p.22)
The built-in light does not
• Bulb is dead.
turn on when LIGHT is set
to ON.
-> Replace the bulb, (p.23)
Picture
Symptom
Cause and/or Corrective Actions
The image on the viewfinder
• The viewfinder lens is not adjusted.
screen is not clear.
-> Adjust the viewfinder lens, (p.ll)
A vertical band appears when . 3 • The contrast between the subject and background is
subject such as lights or a candle too high.
flame is shot against a dark
-> The camcorder is not malfunctioning. Change
background.
locations.
The picture is “noisy”.
• The video heads may be dirty.
-> Clean the heads using the Sony V8-25CLH cleaning
cassette, (p.39)
others
Symptom
Cause and/or Corrective Actions
The supplied Remote
• COMMANDER is set to OEF.
Commander does not work.
-» Set It to ON. (p,29)
• Something is blocking the infrared rays.
-) Remo\ e the obstacle.
• The battery is not inserted with the correct polarity.
-> Insert tile battery with the correct polarity, (p.52)
• The batteries are dead.
Insert new ones. (p..32)
There is dust in the viewfinder
Detach the evecup and clean the viewfinder lens.
(CCD-TR78/TR88 only)
(p.40i
44