To correct the date and time setting, To check the date and time, The year indicator changes as follows – Sony CCD-TR98 User Manual
Page 33: Resetting the date and time
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Resetting the Date and Time
Reset the date and time using the DATH(+) and TiMh(NhX r) buttons.
(1)
Slide the POVVHR switch to CAMERA.
(2)
Turn STANDBY up.
(3)
Press DA rit( + ) and ri.V1E(NEX F) simultaneouslv until the year indicator flashes in the
viewfinder.
(4)
Set year, month, day, time, minute by pressing DA rH(+) and TIMF.(NE,\ I). Note that when \ ou
keep DA'FE(+) pressed, the digits advance faster.
n
Q>
3
To Correct the Date and Time Setting-
Repeat steps 3 and 4.
To Check the Date and Time
Press DATE(-r) to display the date indicator in the viewfinder. Press TIMEfNEXT) to display the time
indicator. When you press the same button again, the indicator goes out.
The year indicator changes as follows:
’96---- *’97------ '25
Note on the time indicator
The internal clock of the camcorder opierates on a 12-hour cycle.
12:00:00 AM stands for midnight.
12:00:00 PM stands for noon.
33