Sony KP-41T35 - Manual (Page 17)

4
Press ♦, ♦, ♦, or * to move the cursor (►) to
the symbol showing the line you want to
adjust, and press CD •
CONVERGENCE
► +RED
+BLUE
OMENU
+
Use gmnasrin ex i BBB
+RED : Red vertical and horizontal line (left/right/up/
down adjustment)
+BLUE :Blue vertical and horizontal line (left/right/up/
down adjustment)
5
Press 4, *, or to move the line until it
converges with the center green line, and
press GD.
To move Press
Up ♦
Down ♦
Right
Left
■ 4»
6
Repeat steps 4 and 5 to adjust the other
lines until all three lines converge and are
seen as a white cross.
7
Press MENU to return to the original screen.
Setting cable TV on or off
If you have connected the projection TV to a cable TV
system, set CABLE to ON (the factory setting). If not,
set CABLE to OEF.
You do not have to do this procedure if you perform
AUTO SET UP (page
14). Do this procedure only when
you want to set it manually.
1
Press MENU.
2
Press 4 or 'f to select and press O: .
3
Set CABLE to ON or OFF:
(1) Press ♦ or ♦ to move the cursor (►) to CABLE,
and press CD.
(2) Press ♦ or ♦ to select ON or OFF, and press GD
SETUP
CHANNEL ERASE/ADD
CHANNEL CAPTION
CHANNEL BLOCK
FAVORITE CHANNEL
CABLE: OFF
AUTO PROGRAM
VIDEO LABEL
LANGUAGE : ENGLISH
CONVERGENCE
DMENU _
Use [1]6] Rd ________ Exit
4
Press MENU to return to the original screen.
Note
• If CABLE appears in gray, the projection TV is set to a video
input and you cannot select CABLE. Press TV (black button) so
that a channel number appears.
Getting Started ^ 7'^!^