Charging and installing the battery pack, Charging the battery pack – Sony CCD-TR83 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
Getting Started
Charging and installing the Battery Pack
Before using your camcorder, you first need to charge and install the battery pack. To charge the
battery pack, use the supplied AC power adaptor.
Charging the Battery Pack
Charge the battery pack on a flat surface without vibration.
(
1
)
Connect the power cord to a wall outlet.
(2)
Align the right side of the battery pack with the line on the AC power adaptor, then slide the
battery pack in the direction of the arrow.
(3)
Set the selector to CHARGE. The CHARGE lamp (orange) lights up. Charging begins.
When charging is completed, the CHARGE lamp goes out. Set the selector to the center position and
unplug the unit from the wall outlet. Then remove the battery pack and install it on the camcorder.
To stop charging, set the selector to the center position.
Battery pack
NP-55
(supplied)
NP-80
NP-80D
NP-77H
NP-68
NP-66H
NP-600
Charging time*
70
190
170
125
105
90
» Approximate minutes to charge an empty battery pack using the supplied AC power adaptor.
(Lower temperatures require a longer charging time.)
Battery Life
CCD-TR36
Battery pack
NP-5S
(supplied)
NP-80
NP-80D
NP-77H
NP-68
NP-66H
NP-C65
NP-60D
Typical recording
time**
30
85
85
65
45
40
Continuous recording
time***
60
165
160
115
90
80