Remote commander, To prepare the remote commander, Identifying the parts – Sony CCD-TR83 User Manual
Page 48
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Identifying the Parts
Remote Commander
The buttons that have the same name on the Remote Commander as on the camcorder function
identically.
Q] Transmitter
Point toward the remote sensor to control the
camcorder after turning on the POWER
switch on the camcorder.
El Tape transport buttons
m DISPLAY button
S Size AA (R6) battery holder
m START/STOP button
IS Power zoom button
The zooming speed is unchangeable in the
Remote Commander.
To Prepare the Remote Commander
To use the Remote Commander, you must insert two size AA (R6) batteries. Use the supplied size AA
(R6) batteries.
(
1
)
Remove the battery cover from the Remote Commander.
(2) Insert both of the size AA (R6) batteries with correct polarity.
(3) Put the battery cover back onto the Remote Commander.
48
Note on battery life
The batteries for the Remote Commander last about 6 months under normal operation. When the
batteries become weak or dead, the Remote Commander does not work.
To avoid damage from possible battery leakage
Remove the batteries when you will not use the Remote Comroander for a long time.