Focusing manually, To return to autofocus mode, To shoot with autofocus momentarily – Sony CCD-TR83 User Manual

Page 24: To activate the steady shot function again, Releasing the steady shot function

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Focusing Manually

To Return to Autofocus Mode

Set FOCUS to AUTO. The (O’ indicator in the viewfinder disappears.

Shooting in relatively dark places

Shoot at wide-angle after focusing in the telephoto position.

Note on the focus dial

The focus dial does not have a stop position.

To Shoot with Autofocus Momentarily

When you want to switch to autofocus momentarily while recording in manual focus mode, push
FOCUS down to PUSH AUTO. Autofocus functions while FOCUS is held down. When it is released,
manual focus mode will be resumed.

’f«;

Releasing the STEADY SHOT function

— For Models with the STEADY SHOT Switch (CCD-TR83/TR93 only)

When you shoot, the «0» indicator appears in the viewfinder. This indicates that the Steady shot
function is working and the camcorder compensates for camera-shake.

You can release the Steady shot function when you do not need to use the Steady shot function. Do not
use the Steady shot function when shooting a stationary object with a tripod.

Set STEADY SHOT to OFF.

To Activate the Steady Shot Function Again

Set STEADY SHOT to ON.

Notes on the Steady shot function

• The Steady shot function will not correct excessive camera-shake.
■ When you switch the STEADY SHOT function on or off, the exposure may fluctuate.