Chapter 1, Setting, Connecting the stereo – Sony MHC-331 User Manual

Page 4: Before connecting the speakers, To connect the front speakers, Am loop antenna connection, To improve the fm reception, To improve the am reception, Setting up

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Chapter 1:

Setting

Connecting the Stereo

Inserting the Batteries

Setting the Clock

Connecting the
Stereo

Use the illustrations below to connect your
stereo.
If you want to connect any optional
components to the stereo, see "Connecting

Optional Equipment" in Chapter 6.

Connecting the

STEP 1

Speakers

After arranging both ends of the speaker
cables, connect all speakers to the ui\it.

Before connecting the speakers
Twist the speaker cable coating and strip it
from the end of the cable.

To connect the front speakers
Connect the right front speaker to the
SPEAKER R connectors and the left front
speaker to the SPEAKER L connectors with
the red cords to ® and the black cords to

STEP 2

Connecting the

Antennas

FM lead antenna* (supplied)

* Note: Extend it horizontally

AM loop antenna connection
Cormect the supplied loop antenna to the
AM and the

terminals.

To improve the FM reception
Connect an external FM antenna to the

750.

and

terminals, using a 75-ohm

coaxial cable.

Important

Ground the external antenna from

terminal against lightning with the screw
clamp. To prevent a gas explosion, do not
connect the ground wire to a gas pipe.

To improve the AM reception
After you connect the AM antenna, connect
a 6- to 15-meter (20- to 50-feet) insulated
wire to the AM terminal. Connect the

terminal to earth.

Important

Ground the external antenna against
lightning from the

terminal. To prevent a

gas explosion, do not connect the ground
wire to a gas pipe.

(not supplied)

^ I Chapter 1: Setting Up