Specifications, Cd player section, Tuner section – Sony MHC-331 User Manual
Page 26: Tape player section, Speaker, Supplied accessories, General, Index to parts and controls, For the u.s. model audio power specifications, Front panel
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/630414/26/background.png)
Specifications
For the U.S. model
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND
TOTAL HARMONIC
DISTORTION;
With 6 ohm loads, both
channels driven, from 40 - 20
kHz; rated 20 watts per
channel minimum RÌMS
power, with no more than 10
% total harmonic
distortion.
CD player section
System
Compact disc and digitai
audio system
Laser
Semiconductor User
Laser output Max. 44.6^W*
* This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7
mm
aperture.
Wavelength 780 - 790 nm
Tuner section
FM stereo, FM / AM superheterodyne
tuner
FM tuner section
Tuning range 87.5 -108.0 MHz
(100 kHz step)
Antenna FM lead antenna
Antenna terminals
' 75 ohm unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range 531 -1,710 kHz (with the
tuning interval
set
at 9 kHz)
530 - L710 kHz
(with the tuning interval set
at 10 kHz)
Antenna
AM loop antenna, -
External antenna terminals
Intermediate frequency
450 kHz
Amplifier section
Continuous RMS power output
20 W + 20 W (6 ohms at
1 kHz, 5% THD)
Inputs
VIDEO /100 CD IN (phono jacks):
voltage 450 mV,
impedance 47 kilohms
Outputs
PHONES (stereo phone jack):
accepts headphones of
8 ohms or more.
SPEAKER:
accepts impedance of 6 to
16 ohms.
SUPER WOOFER:
Voltage 1 V, impedance
1 kilohms
Tape player section
Recording system
4-track 2-charmel stereo
Frequency response
(DOLBY NR OFF)
60 - 13,000 Hz (±3 dB),
using Sony TYPE I cassette
60 -14,000 Hz (±3 dB),
using Sony TYPE II cassette
Wow and flutter
±0.15% W. Peak (lEC)
0.1% W. RMS (NAB)
±0.2% W. Peak (DIN)
Speaker
SS-H557
Speaker system 2-way system/
bass-reflex type
Speaker units
Woofer:
15 cm dia., cone type
Tweeter: 5 cm dia., cone type
Nominal impedance
6 ohms
Dimensions Approx. 195 x 325 x
275 mm
( 7 y * x l l ' / ^ x
10^/8in) (w/h/d)
Mass
Approx. 3.5 kg {7 lb 11 oz)
per speaker
Supplied accessories
AM loop anterma (I)
Remote RM-SCIOOP (1)
Sony SUM-3 (NS) batteries (2)
FM lead antenna (1)
General
Power requirements
120 V AC, 60 Hz
Power consumption
U.S. model: 60 W
Canadian model: 70 W
Dimensions Approx. 280 x 325 x
360 mm
(11 V8xl2Vf>il4 7^ in)
(w/h/d)
incl. projecting parts and
controls
Mass
Approx. 7 kg (15 lb 7 oz)
Design and specifications are subject to
change without notice.
index to Parts and
Controls
Refer to the pages indicated in parentheses
for details on how to use the controls.
Controls with an asterisk have indicators
on themselves.
Front Panel
m DISC SKIP EX-CHANGE button* (7)
[2] LOOP button (11)
[3] POWER button (7)
[
4
] Disc tray (7)
[
5
] TIMER button (21)
m PHONES jack (19)
[
7
] DISPLAY/DEMO button (5)
[H SURROUND button (19)
[D MENU 1 - 3 buttons (19)
0lDISCl-3buttons*(7)
ini - OPEN/CLOSE button (7)
liH □ (stop) button (7)
55 wo (play/pause) button* (7)
SAPPILE button (20)
51
EFFECT ON/OFF button* (19)
51TIMER/BAND button (12)
521 FUNCTION button (7)
51
CLIP A - C buttons (10)
51 CLIP ERASE button (10)
^ CLIP PLAY button (10)
U DOLBY NR button (14)
^ MULTI FUNCTION CONTROL buttons
(27)
M
Deck A (14)
26
I
Your Information