Sony CCD-TRV62 - Manual (Page 69)

rouble check
iptom Cause and/or Corrective Action
■ cassette cannot be
loved from the holder. • The battery is dead.
Use a charged battery pack or the AC power adaptor,
(p. 6, 25)
md ^ indicators flash and
function except for cassette
tion works.
• Moisture condensation has occurred.
■¥ Remove the cassette and leave the camcorder for at least
1 hour. (p. 63)
‘ date or time indicator is
hing.
• You pressed DATE and TIME together for more than 2
seconds.
The camcorder is not malfunctioning. You may start
recording. Flashing will stop soon.
• The lithium battery is weak or dead.
4 Replace the lithium battery with a new one. (p. 55)
tape does not move when
ideo control button is
ssed.
• The POWER switch is set to CAMERA or OFF.
■> Set it to VTR.
• The tape has run out.
Rewind the tape or use a new one. (p. 22)
‘ Steady, Shot function does
activate.
• STEADY SHOT is set to OFF.
■* Set STEADY SHOT to ON. (p. 43)
• The Steady Shot function does not work when the wide
mode is set to 16:9 FULL.
‘ autofocusing function
'S not work. • FOCUS is set to MANUAL.
Set it to AUTO. (p. 37)
• Shooting conditions are not suitable for autofocus.
Sef FOCUS to MANUAL to focus manually, (p. 37)
! fader function does not
rk. • The START/STOP MODE switch is set to 5SEC or .
Set it to A . (p. 15)
• A title is displayed.
Stop superimposing the title, (p. 44)
sound or only a low
ind is heard when playing
k a tape.
• The stereo tape is played back with HiFi SOUND set to 1
or 2 in the menu system.
Set to STEREO in the menu system, (p. 31)
essive high-pitched sound
leard.
• The picture has been recorded with WIND set to ON in the
menu system.
-> When there is no wind, set it to OFF. (p. 29)
i date or time indicator
appears. • Reset the date and time. (p. 57)
:ture
iptom Cause and/or Corrective Action
i image on the viewfinder
ien is not clear.
• The viewfinder lens is not adjusted.
Adjust the viewfinder lens. (p. 12)
ertical band appears when
rbject such as lights or a
die flame is shof against a
k background.
• The contrast between the subject and background is too
high. The camcorder is not malfunctioning.
Change locations.
(to be continued)
>
Q.
C l
69