beautypg.com

Maintenance information and precautions, Inside the camcorder, On the lens – Sony CCD-TRV62 User Manual

Page 63: How to prevent moisture condensation, Caution, Note, Moisture condensation, Video head cleaning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Maintenance information and precautions

Moisture condensation

If the camcorder is brought directly from a cold place to a warm place, moisture may

condense inside the camcorder, on the surface of the tape, or on the lens. In this
condition, the tape may stick to the head drum and be damaged or the unit may not
operate correctly. To prevent possible damage under these circumstances, the
camcorder is furnished with moisture sensors. Please, take the following precautions.

Inside the camcorder

If there is moisture inside the camcorder, the beep sounds and the IE indicator flashes.
If this happens, none of the functions except cassette ejection will work. Open the
cassette compartment, turn off the camcorder, and leave it about 1 hour. When
indicator flashes at the same time, the cassette is inserted in the camcorder. Eject the
cassette, turn off the camcorder, and leave also the cassette about 1 hour. The camcorder
can be used again if the ffl indicator does not appear when the power is turned on
again.

On the lens

If moisture condenses on the lens, no indicator appears, but the picture becomes dim.

Turn off the power and do not use the camcorder for about 1 hour.

How to prevent moisture condensation

When bringing the camcorder from a cold place to a warm place, put the camcorder in a
plastic bag and allow it to adapt to room conditions over a period of time.

(

1

)

Be sure to tightly seal the plastic bag containing the camcorder.

(

2

)

Remove the bag when the air temperature inside it has reached the

temperature surrounding it (after about 1 hour).

Video head cleaning

To ensure normal recording and clear pictures, clean the video heads. When the
© indicator and " ^ CLEANING CASSETTE" message appear one after another or
playback pictures are "noisy" or hardly visible, the video heads may be dirty.

[a]

^ [b]

[a]

Slightly dirty

[b]

Very dirty

If this happens, clean the video heads with the Sony V8-25CLH cleaning cassette (not
supplied). After checking the picture, if if is still "noisy," repeat the cleaning. (Do not
repeat cleaning more than 5 times in one session.)

Caution

Do not use a commercially available wet-type cleaning cassette. It may damage the
video heads.

Note

If the Sony V8-25CLH cleaning cassette is not available in your area, consult your
nearest Sony dealer.

63

This manual is related to the following products: