Editing onto another tape, Starting editing, To edit more scenes – Sony CCD-TRV62 User Manual
Page 53: To stop editing, Note on fine synchro edit
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing onto another tape
Starting editing
Turn down the volume of the camcorder while editing. Otherwise, picture distortion
may occur.
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
your recorded tape into the camcorder.
(
2
)
Play back the recorded tape on the camcorder until you locate the point where
you want to start editing, then press II to set the camcorder in playback pause
mode.
(
3
)
On the VCR, locate the recording start point and set the VCR in recording
pause mode.
(
4
)
Press II on the camcorder and VCR simultaneously to start editing.
To edit more scenes
Repeat steps 2 to 4.
To stop editing
Press □ on both the camcorder and the VCR.
Note on Fine Synchro Edit
If you connect a video deck that has the Fine Synchro Edit feature to the LANC C jack
of the camcorder, using a LANC cable (not supplied), the edit will be even more
precise.
>
a.
<
Q.
O
•a
tin
PH
53