Items for vtr mode only, Edit
Page 31: Tbc*

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Changing the mode settings

Items for VTR mode only

EDIT

• Select ON to minimize picture deterioration when editing.
• Normally select OFF.

HiFi SOUND

• Normally select STEREO.
• Select 1 or 2 to play back a dual sound track tape.

TBC*

• Normally select ON, to correct for jitter.
• Select OFF to not correct for jitter. The picture may not be steady when played back.

Note on TBC setting

Set TBC to OFF when:

• Playing back a tape you have dubbed over.
• Playing back a tape on which you recorded the signal of a TV game or similar

machine.

• The playback picture fluctuates.

DNR*

• Normally select ON to reduce picture noise.
• Select OFF if the picture has a lot of movement, causing a conspicuous afterimage.

The following settings work only during playback

EDIT, HiFi SOUND, TBC, and DNR.

• These settings are retained even when the battery is removed, as long as the lithium

battery is in place.

■D

This manual is related to the following products:

Page 31: Tbc*