Appendix a console commands, Appendix a console commands 43, Show command – Compex Technologies NetPassage 15B User Manual
Page 50: Set command, Ping command, Delete command
Appendix A Console Commands
43
Appendix A
Console Commands
SHOW Command
SYNTAX
DESCRIPTION
SHOW IP
Display the IP information of the LAN and WAN interface
SHOW IP STAT
Display the statistics of the IP packets
SHOW ICMP STAT
Display the statistics of the ICMP packets
SHOW UDP STAT
Display the statistics of the UDP packets
SHOW TCP STAT
Display the statistics of the TCP packets
SHOW IP ROUTE TABLE
Display the routing table
SHOW IP STATIC NAT TABLE
List defined virtual servers based on IP forwarding
SHOW PORT STATIC NAT TABLE
List defined virtual servers based on port forwarding
SHOW SYSTEM
Display the system information
SHOW RIP
Display the status of the dynamic routing protocol
SHOW GATEWAY
Display the gateway IP address of the WAN interface
SHOW DHCP
Display the DHCP information
SHOW DHCP RESERVE
Display the DHCP reservations
SHOW DHCP LEASE
Display the leased IP information
SHOW ETHERNET ADDRESS
Display the MAC address of the LAN & WAN interface
SHOW TELNET SESSION
Display the source IP of the open TELNET console session
SHOW TIME
Display current router’s time
SHOW NAT STAT
Display the status of the NAT
SHOW ARP TABLE
Display the ARP table in the router
SHOW FILTER
List defined IP packet filtering rules
SET Command
SYNTAX
DESCRIPTION
SET IP LAN
Set the IP address of the LAN interface
SET IP WAN
Set the IP address of the WAN interface
SET GATEWAY
Set the gateway IP address of the WAN interface
SET SYSTEM NAME
Set the router’s identity
SET SYSTEM CONTACT
Specify the contact person for this router
SET SYSTEM LOCATION
Specify the location of this router
SET PASSWORD
Changing the administrative password
SET TIMEZONE
Set the timezone based on GMT time difference
SET TIME
Set the router’s time
SET DATE
Set the router’s date
SET DHCP SERVER
Configure the DHCP server
SET PROMPT “
Set the text appear at the command console
SET WAN TYPE
Select the WAN type
SET FILTER MODE
Set the option on IP packet filtering rules
PING Command
SYNTAX
DESCRIPTION
PING
Ping a host by its IP address
DELETE Command
SYNTAX
DESCRIPTION
DELETE ARP
Remove an IP address from the ARP table
DELETE IP ROUTE
Remove an entry from the routing table
DELETE IP STATIC NAT
Delete an entry from the list of defined virtual server based on IP