Erasing data from the caller id list, To erase one stored caller id at a time, Deleting single call – Sony SPP-M920 User Manual
Page 30: To erase the entire list at once, Delete all? del to allow, Deleting all calls
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Caller ID service (continued)
Erasing data from the Caller ID list
The phone maintains the data of the last 50 calls in memory. If a new
call comes in after those 50 calls, the oldest number will be
automatically erased and the new call will be stored.
To erase one stored Caller ID at a time
1
Press
(CALLER ID).
The display shows the memory location number and the
name for the most recent call.
2
3
Press A(
-x-TONE)
or ▼(2)to display the Caller ID data
(either phone number or name) you want to erase.
Press and hold (
INTERCOM/DEL)
for more than one second.
You hear a confirmation beep and the display shows:
DELETING
SINGLE CALL
4
Press
(OFF) to finish.
To erase the entire list at once
1
Press
(CALLER ID).
The display shows the memory location number and the
name for fhe most recent call.
2
Press and hold
(CONF/CLEAR) for
more than two seconds.
The display will show the following for a final confirmation
before the entire list is erased.
DELETE ALL?
DEL TO ALLOW
Pressing any button other than (
INTERCOM/PEL)
will cancel
the operation. Pressing (
INTERCOM/DEL)
will confirm fhe
operafion and the display will then show;
DELETING
ALL CALLS
30"
The same procedure applies for deleting the speed dial
location(s).
Advanced Features