Switching the phones during a call, From the handset to the base phone – Sony SPP-M920 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Switching the phones during a call
You can easily switch between the handset and speakerphone on the
base phone without disconnecting thecall.
From the base phone to the handset
1
Press
(HOLD),
then
(INTERCOM)
on the base phone during a call.
The handset rings. When a person
at the handset presses
(INTERCOM
), you can talk with
the person at the handset.
Press (
LINE 1
) or (
LINE
2
).
on the
handset, whichever is in use.
The call is transferred to the
handset.
If no one answers the handset,
press (
LINE 1
) or (
LINE
2) on the
base phone, whichever is in use, to
resume the conversation.
From the handset to the base phone
1
Press
(HOLD/PAUSE), then
(INTERCOM/DEL) on the handset
during
a call.
The base phone rings. After the
one ring, you can talk with the
person at the base phone.
Press (
LINE 1
) or (
LINE 2
) on the
base phone, whichever is in use.
The call is transferred to the base
phone.
If no one answers the base phone,
press (
LINE
1) or (
LINE
2) on the
handset, whichever is in use, to
resume the conversation.
Note
You can also switch the phone directly without pressing (
INTERCOM)
if you
press the (
line
1
) or (
line
2
)
during hold on whichever unit is not in use
(handset or base phone).
I
b
3
n
a
(D
ft)
l/i
Advanced Features
23"