Sony KP-53V15 - Manual (Page 41)

Changing the window picture input mode
Remote Commander
Mumc c cAmoN sleep power
OO 01=1
CBf FHEEZE TV
□ □ □ □ □
CH-
(=1
posmow AUDIO
01=)
/-V x-s. TV/VIDEO
0 0 ® □
1
Press PIP to display a window picture.
PIP
Press TV/VIDEO in the Picture-in-Picture control area
to select the input mode.
Each time you press TV/VIDEO, TV.’ ’VIDEO 1,”VIDEO 2"
and "VIDEO S’appMTki sequence.
TV/VIDEO
%
To change TV channels in the window picture
Press CH +/- in the PIP control area.
Displaying CATV input as a window picture
To use Picture-in-Picture with pay cable TV input, make the
connections to your cable converter box as shown below.
(Front inner panel)
Signed flow
(Rear of projection TV)
;not supplied)
Signal
’^7=' >T\ spiitter
5
?}
VCR
Decoder
DOX
CATV
cable
After making the above connections, turn the ced)le
connection on by following the steps on pp. 26 - 27; then
continue with the steps below.
1-2 Follow steps 1 - 2 in *dianging the window S
picture input mode” on this page to select the
3
\ddeo input mode for your connected VCR. «
3 Put your VCR on an inactive channel (channel 3 or 4).
Change pay cable TV channels with the decoder box.
To control your cable converter box with the supplied
Remote Commander
See p. 70.
Chapter 3: Using Advanced Features
141