Connecting other equipment, Preparing for use, Notes – Sony KP-53V15 User Manual
Page 18: Watching a different image whiie dupiicating
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting Other Equipment
Connecting two VCRs (not equipped with an S video output jack) for tape editing
Signal flow
(Rear of projection TV)
(Front inner panel)
to video
input
to audio
input
to video
input
to video!
output
to audio
output
to video
output
VCR
1
1
VCR
(for playback)
1
1
t
(for recording)
to video
input
to audio
input
VMC-810S/820S
(not supplied)
VMC-810S/820S
(not supplied)
Preparing for use
1 Turn on the projection TV.
2 Press TV/VIDEO on the projection TV or on the Remote
Commander so that “VIDE01“VIDEO 2"
or
“VIDEO 3“
appears on the screen.
VIDE01: for equipment connected to VIDE011N
VIDEO 2: for equipment connected to VIDEO 2 IN
VIDEO 3; for equipment connected to VIDEO 3 IN
Notes
• If you try to use equipment that is connected to the front and rear
VIDEO 3 IN jacks at the same time, the picture will be distorted.
Be sure you turn off one piece of equipment first.
• If you have connected to a Camcorder's input jacks, do not
connect to the projection TV’s input jacks.
• If you connect equipment to the rear VIDEO 3 IN S VIDEO jack,
you cannot receive the output signal from the VIDEO 3 OUT
VIDEO jack.
Watching a different image whiie dupiicating
The VIDEO 3 OUT jacks only output the signal from the
VIDEO 3 Input jacks.
If you connect a VCR for playback to the front or rear VIDEO
3 IN jacks, and a VCR for recording to the VIDEO 3 OUT
jacks to duplicate your recorded tapes, you can watch input
images different from the image being output for recording.
To watch a different input image
Press TV/VIDEO on the projection TV or on the Remote
Commander to select the input image you want to watch.
18
Chapter 1: Setting Up