Editing tapes – Sony GV-300 User Manual

Page 33

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Editing Tapes

You can edit tapes by connecting another VCR (8mm, Beta or VMS format) with video/audio
input.

I^Eim fiam Anottwr VCR to Tlili Unit

If the VCR to be connected has a monaural audio output only, use a commercially available con
necting cord such as the VMC-710/720M. In this case, connect to the AUDIO L and VIDEO jacks.

Turn the power on.
The POWER lamp

illuminates.

While pressing green button,,

slide the POWER switch to
the left.

, Insert the cassette.

i Press the INPUT SELECT button so that the "LINE"

indication appears.

Select the recording mode (SP/LP) by pressing the

SP/LP button.

Play back the tape on another VCR and press the

(PAUSE) button at the point

you want to start playing back.

) Set this unit in the recording pause mode.

Release the || (PAUSE) buttons on both units.

After editing is completed, press the n (STOP) buttons on both units to stop
recording.